Arabic Network Howto for any distro:
The following is just a quick draft. Not even in Arabic. But eventually should be. Needs to be translated.
After loading your driver you can get sure that it is recognized by typing
Usually your card will have network interface name eth0. If your router/modem is running a DHCP server (in other words is set to automaticly give ip addressses to devices connected to it) just use
Here you must know mainly three things:
Where 192.168.1.1 is your IP.
Where 192.168.1.0 is the IP of your router or DSL Modem.
Edit /etc/resolve.conf and put some DNS servers. Put the following
Where again 192.168.1.0 is the IP of your router or DSL Modem.